Description
Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals. The decorative hammered appearance is smooth to the touch and sheds water well. It is available in a variety of popular colours.
- Can be applied directly onto rusty metal.
- No need for primer or undercoat.
- Can be applied by brush or roller.
Applications
- Direct to Rust
Direct to Rust Metal Paint Hammered Finish can be used for:
- Metal Door
- Metal Garden furniture
- Metal gate
- Metal Railings
Features:
Finish: Hammered
Coverage: 5 sq m per litre
Durability: 8 Year Protection
Repaintable: after 4 hours
Hammerite Metal Paint can be used for all kinds of metal, like railings, garden furniture and pots or even a balcony. It is not only an excellent way to protect your metal objects, you can also lift the look of them.
- Remove all loose rust and flaking paint from the metal using a wire brush.
- If the metal was already painted, wash down thoroughly with diluted detergent, rinse with clean water and allow to dry.
- To ensure compatibility, apply a small test patch of Hammerite Direct to Rust Metal Paint Smooth Finish to the painted surface. Any reaction will occur within an hour. If a reaction is evident, remove all paint then wash down with degreaser. Rinse with clean water and allow to dry.
- If the objects are made from bare zinc, aluminium or galvanized metal use Hammerite Direct to Galvanised Metal Paint.
- For smooth metal surfaces, lightly abrade for maximum adhesion.
- Cover the surface beneath the metal object with thick newspaper or a dust sheet to catch any spills or drips.
- Stir the paint thoroughly before use, and apply with a good quality brush. A narrow brush is best for use on railings. A broad is best for use on bigger metal object, like a garden table.
- Apply two thin coats of Hammerite Direct to Rust Metal Paint in Smooth finish for the best results, leaving to dry in between as per instructions on back of pack.
