Description
This is a smooth gloss finish which will retain its sheen for years. As always it is a durable, corrosion resistant decorative coating for ferrous and non-ferrous metals.
Available in 11 popular colours.
Can be applied directly onto rusty metal by roller or brush.
Primer or undercoat are not necessary.
Applications:
Direct to Rust
Direct to Rust Metal Paint Smooth Finish can be used for:
Metal Door
Metal Garden furniture
Metal gate
Metal Railings
Features:
Finish: Smooth
Coverage: 5 sq m per litre
Durability: 8 Year Protection
Repaintable after: 4 hours
Hammerite Metal Paint can be used for all kinds of metal, like railings, garden furniture and pots or even a balcony. It is not only an excellent way to protect your metal objects, you can also lift the look of them.
- Remove all loose rust and flaking paint from the metal using a wire brush.
- If the metal was already painted, wash down thoroughly with diluted detergent, rinse with clean water and allow to dry.
- To ensure compatibility, apply a small test patch of Hammerite Direct to Rust Metal Paint Smooth Finish to the painted surface. Any reaction will occur within an hour. If a reaction is evident, remove all paint then wash down with degreaser. Rinse with clean water and allow to dry.
- If the objects are made from bare zinc, aluminium or galvanized metal use Hammerite Direct to Galvanised Metal Paint.
- For smooth metal surfaces, lightly abrade for maximum adhesion.
- Cover the surface beneath the metal object with thick newspaper or a dust sheet to catch any spills or drips.
- Stir the paint thoroughly before use, and apply with a good quality brush. A narrow brush is best for use on railings. A broad is best for use on bigger metal object, like a garden table.
- Apply two thin coats of Hammerite Direct to Rust Metal Paint in Smooth finish for the best results, leaving to dry in between as per instructions on back of pack.

